メインコンテンツにスキップ

Acer AL2216W Power Supply Capacitor Replacement「はじめに」への変更

- Nickによって編集

承認済みの編集 : Nick

削除
追加
変更なし
Introduction
'''Note: The entry for 60/40 solder is being considered optional. If you want to use lead free solder, it will also work as well.''' If your AL2216W is acting up, you probably need to replace the capacitors. Here are some signs of bad capacitors. * Power issues (No power, for example)* * Video issues(Image stability, doesn't stay on when plugged into a computer, resolution specific issues, image drops at random)* * Auto adjustment issues * Power light is unstable all the time (Not common. However, this can happen.) * Unplugging it to get it to work becomes a problem * Excessive transformer/inverter hum* [ … ] NOTE: If you have a problem with a * next to it, replace all of them no matter what the condition is. [ … ] The one in the guide has automatic adjustment issues and some power issues when hooked up to a computer. It also had transformer hum problems. This monitor has been opened before so this one was easier. If you have never opened it this tends to be a pain for the first time. [ … ] '''If you injure yourself performing this repair, I will not take responsibility for your actions! FOLLOW ALL SAFETY INSTRUCTIONS AND GUIDANCE TO AVOID INJURY!'''
'''Note: The entry for 60/40 solder is being considered optional. If you want to use lead free solder, it will also work as well.''' If your AL2216W is acting up, you probably need to replace the capacitors. Here are some signs of bad capacitors. * Power issues (No power, for example)* * Video issues(Image stability, doesn't stay on when plugged into a computer, resolution specific issues, image drops at random)* * Auto adjustment issues * Power light is unstable all the time (Not common. However, this can happen.) * Unplugging it to get it to work becomes a problem * Excessive transformer/inverter hum* [ … ] NOTE: If you have a problem with a * next to it, replace all of them no matter what the condition is. [ … ] The one in the guide has automatic adjustment issues and some power issues when hooked up to a computer. It also had transformer hum problems. This monitor has been opened before so this one was easier. If you have never opened it this tends to be a pain for the first time. [ … ] '''If you injure yourself performing this repair, I will not take responsibility for your actions! FOLLOW ALL SAFETY INSTRUCTIONS AND GUIDANCE TO AVOID INJURY!'''

ツール

  • Soldering Workstation x1 added.
  • Soldering Iron x1 Remove the old capacitors removed.
  • Solder x1 For installing the new capacitors removed.
  • Rosin Flux Electronics x1 Optional-Solder can be used in place of flux removed.
  • Flush Wire Cutters x1 Trimming the capacitor leads removed.
  • 60/40 Leaded Solder x1 Optional-if you don't want to use RoHS and can buy 60/40 removed.