修理を始めるには コミュニティ ストア

1%イントロ・ヒストリー:Motorola Edge Midframe Replacement.

- Jennifer Bergによって編集

承認済みの編集 : Jennifer Berg

前
後
変更なし
Introduction
Follow this guide to remove and replace the midframe on a Motorola Edge.
***There is a significant chance that you may break the unreinforced and fragile display panel during this procedure.*** Be sure to apply plenty of heat and be extremely careful during the prying stage.
***For your safety, discharge the battery below 25% before disassembling your phone.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
***Note:*** Some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires you to transplant all of your phone's internals and install a new battery. Make sure you have the correct part before starting this guide.
Conclusion
To reassemble your device, follow these instructions in reverse order.
For optimal performance, [[Battery Calibration|calibrate your newly installed battery|new_window=true]] after completing this guide.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Motorola%20edge|Answers Community|new_window=true] for help.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before you install it.