すべての履歴すべての履歴

1%イントロ・ヒストリー:Motorola Edge Fingerprint Sensor Replacement.

2022年5月31日 - Jennifer Bergによって編集

承認済みの編集 : Jennifer Berg

: 前
: 後
: 変更なし

Introduction

Follow this guide to remove and replace the fingerprint sensor on a Motorola Edge.

***There is a significant chance that you may break the unreinforced and fragile display panel during this procedure.*** Be sure to apply plenty of heat and be extremely careful during the prying stage.

***For your safety, discharge the battery below 25% before disassembling your phone.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].

Conclusion

To reassemble your device, follow these instructions in reverse order.

For optimal performance, [[Battery Calibration|calibrate your newly installed battery|new_window=true]] after completing this guide.

Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].

Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Motorola%20edge|Answers Community|new_window=true] for help.

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before you install it.