メインコンテンツにスキップ

Adjusting Ibanez SR405QM Truss Rodはじめにへ変更

Kameron Kennedyさんによる編集

承認済みの編集 : Kameron Kennedy

変更なし
Thing
TrustTruss Rod
Title
Repairing SR405QM TrustTruss Rod
Introduction
The trusttruss rod can be replaced with the strings on the bass under tension, or with the strings off. Personally, I dislike Because the location of the strings in relation to the screws covering the plate covering the trust rod, and the trust rod is covered perfectly by the D string. Thus, because the Alanallen wrench we are using is bulky, this guide will be doneshow how to adjust the truss rod with the strings offremoved.
Note, if: If the strings are off, the fretboard will bow. Thus, determining how much the trust rod needs to be tightened or loosened must be done while the strings are still on the bass and under tension.
Time Required Min
20分
Time Required Max
20分
Conclusion
To reassemble your device, follow these instructions in reverse order.
You've successfully adjusted the truss rod!
Summary
High tension caused by the strings can cause the wood of the fret board to begin bowingbow. This bowing can become so extreme it becomes difficult or impossible to play on due to the string height. Thus, in this guide we will learn to loosen or tighten the ttruss rod.

ガイドの前提条件

ツール

  • Hex/ Allen wrench x1 added.
  • Online Tuner x1 added.
  • Phillips #1 Screwdriver x1 added.
  • Wire cutters/side cutters x1 added.