メインコンテンツにスキップ

AJS/Matchless Lightweight fitting Boyer Bransden electronic ignition「はじめに」への変更

- Paul Barnfatherによって編集

承認済みの編集 : Paul Barnfather

削除
追加
変更なし
Title
fitting Boyer Bransden electronic ignition
fitting Boyer Bransden electronic ignition
Introduction
[ ]The standard Wipac ignition system fitted to Lightweights is pretty bad. While it can work OK, the advance/retard mechanism is very prone to wear, replacement points are expensive and the timing seems to flutter all over the place. This leads to erratic idle and poor high-speed performance. The solution is to fit an electronic ignition system that eliminates the points and mechanical advance/retard. [http://www.boyerbransden.com|Boyer Bransden] make a very neat electronic ignition system for classic motorcycles. This guide describes how to fit one to an AJS/Matchless Lightweight.