メインコンテンツにスキップ

Alpine MRV-M500 Electrolytic Capacitor Replacement「はじめに」への変更

- Eric Gaulkeによって編集

承認済みの編集 : Eric Gaulke

削除
追加
変更なし
デバイス
[ ]Alpine MRV-M500
Type
[ ]replacement
Thing
[ ]Electrolytic Capacitor
Title
[ ]Alpine MRV-M500 Electrolytic Capacitor Replacement
Introduction
[ ]Electrolytic capacitors are electronic components used to store energy. If too much current runs through a capacitor, it may become bulged and need to be replaced. To replace a capacitor on the MRV-M500 you will need previous experience soldering electronics.
Time Required Min
見積もりなし
Time Required Max
見積もりなし
Difficulty
Very difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
いいえ
Summary
[ ]Replace bulged capacitors on the MRV-M500 circuit board.

ツール

  • Phillips 3 Screwdriver x1 added.
  • Soldering Iron x1 added.
  • Desoldering Braid x1 added.
  • Lead-based solder x1 added.

パーツ

  • Electrolytic capacitor x1 added.

フラグ

  • In Progress added.
  • Student In Progress added.

手順

Step #: 1