メインコンテンツにスキップ

Samsung Galaxy Note8 Display Assembly with Frame Replacementはじめにへ変更

Dominik Schnabelrauchさんによる編集

承認済みの編集 : Dominik Schnabelrauch

変更なし
デバイス
Samsung Galaxy Note8
Type
replacement
Thing
Display assembly with frame
Title
Samsung Galaxy Note8 Display Assembly with frame Replacement
Introduction
Use this guide to replace the display assembly including the frame of your Galaxy Note8.
'''Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.'''
This guide involves removing the rear glass cover, you will need replacement adhesive to reattach the back cover to the phone.
Opening the Samsung Galaxy Note8 will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''', but will '''loose its water-protection'''.
Time Required Min
見積もりなし
Time Required Max
見積もりなし
Imageid
Difficulty
Moderate
Conclusion
If possible, turn on your phone and test your repair before installing new adhesive and resealing the phone.
After reapplying adhesive, follow these instructions in reverse order to reassemble your device.
Author
Public
いいえ
Summary
This guide shows you how to replace a broken or defective display including the frame on the Samsung Galaxy Note8.

ガイドの前提条件

ツール

  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Tweezers x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.

フラグ

  • In Progress added.

手順

Step #: 1