メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

Applying Low Voltage After Every Repair (Retina MacBook 2015 Only)はじめにへ変更

Jeff Suovanenさんによる編集

承認済みの編集 : Jeff Suovanen

変更なし
デバイス
[ ]Retina MacBook 2015
Type
[ ]technique
Title
[ ]Applying Low Voltage After Every Repair (Retina MacBook 2015 Only)
Introduction
The first-generation 12" Retina MacBook has a design quirk that requires connection to low-voltage power after a repair. '''If this step is skipped, permanent logic board damage may result.''' This procedure is not required for 2016 and later models. [ … ] Connecting the Retina MacBook to low-voltage power requires a 5W iPhone A/C adapter and a USB-A to USB-C cable, neither of which is included in the box.
Time Required Min
見積もりなし
Time Required Max
見積もりなし
Imageid
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
いいえ
Summary
[ ]After any repair, but before powering on, the 2015 12" Retina MacBook must be briefly connected to an iPhone charger to prevent damage to the logic board.

フラグ

  • In Progress added.

手順

Step #: 1