bObi Robotic Vacuum Front Wheel Replacement - iFixit 修理ガイド

はじめに

This guide will teach you how to remove, clean, and replace the front wheel on bObi.

必要な工具と部品

手順1 Front Wheel

bObi Robotic Vacuum Front Wheel Replacement, Front Wheel: 手順 1、 2の画像 1

bObi Robotic Vacuum Front Wheel Replacement, Front Wheel: 手順 1、 2の画像 2

Turn the front wheel so it faces bObi's front touch sensors.
Grip the wheel and pull straight up.
You may use a screwdriver for leverage when removing the wheel.

手順2

bObi Robotic Vacuum Front Wheel Replacement: 手順 2、 2の画像 1

bObi Robotic Vacuum Front Wheel Replacement: 手順 2、 2の画像 2

This step is only necessary when cleaning the wheel. Skip to step 4 for instructions on installing a new wheel.
To disassemble and deep clean the wheel, remove two small screws found on the bottom of the wheel. Then you can open it.
Grip the actual wheel and pull up to detach and clean beneath it. Use the screwdriver as leverage if you have difficulty separating the parts.

手順3

bObi Robotic Vacuum Front Wheel Replacement: 手順 3、 3の画像 1

bObi Robotic Vacuum Front Wheel Replacement: 手順 3、 3の画像 2

bObi Robotic Vacuum Front Wheel Replacement: 手順 3、 3の画像 3

This step is only necessary when cleaning bObi's front wheel. Skip to step 4 for instructions on installing the wheel.
After cleaning, replace the small spring piece inside the wheel.
Hold the wheel cover back together and install the two screws.
Place the small wheel back in its space and apply pressure until it reattaches.

手順4

bObi Robotic Vacuum Front Wheel Replacement: 手順 4、 1の画像 1

Place the wheel back in bObi. Make sure it faces in the same way as it did when removing (wheel closer to bObi's front).
Push down and the wheel will attach to bObi.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Chelsea

メンバー登録日: 09/24/14

2,278 ポイント

31のガイドは作成済み

+8 個以上のバッジ

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,467