メインコンテンツにスキップ

Zenithink ZTPAD ZT280 C91 Screen Replacement

必要な工具と部品

  1. Zenithink ZTPAD ZT280 C91 Screen Replacement, Back Panel: 手順 1、 1の画像 1
    • Remove the two screws on the bottom using a Phillips #00 screwdriver.

    • For differentiation purposes, these screws are 4mm long.

  2. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 2、 3の画像 1 Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 2、 3の画像 2 Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 2、 3の画像 3
    • Using a spudger, start prying the case apart by working around the edge slowly.

    • Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger.

    • While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed

    • Be careful to not damage the speaker cables, they will still be connecting both panels.

  3. Zenithink ZTPAD ZT280 C91 Screen Replacement, Motherboard: 手順 3、 1の画像 1
    • Peel back the touch interface chip (which is on the top right of the motherboard, covered in yellow tape.)

  4. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 4、 1の画像 1
    • Flip up the small gate and unplug the ribbon cable shown.

  5. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 5、 1の画像 1
    • Using a Phillips #00 screwdriver, remove the screws highlighted with the orange rings as shown in the picture.

    • For differentiation purposes, these screws are 3.5mm long.

  6. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 6、 1の画像 1
    • Slide back the plastic latch for the main display cable.

    • Carefully unplug the cable with tweezers.

  7. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 7、 2の画像 1 Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 7、 2の画像 2
    • Slide back the plastic latch for the camera cable.

    • Carefully unplug the cable with tweezers.

  8. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 8、 1の画像 1
    • Peel back the reflective tape.

  9. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 9、 2の画像 1 Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 9、 2の画像 2
    • Lift up the motherboard assembly, starting by lifting up the top.

    • Be careful not to damage any of the ports on the underside of the tablet.

    • The camera cable will slide through a small notch and end up underneath the board.

  10. Zenithink ZTPAD ZT280 C91 Screen Replacement, Front Panel: 手順 10、 1の画像 1
    • Remove the four highlighted screws using a Phillips #1 screwdriver.

    • For differentiation purposes, these screws are 4mm long and have a larger head than the rest of the screws.

  11. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 11、 1の画像 1
    • Starting from the top, slowly lift everything up out of the front panel.

    • Remove the front panel off of the device.

    • Be careful not to damage the ports along the bottom.

  12. Zenithink ZTPAD ZT280 C91 Screen Replacement, Screen: 手順 12、 1の画像 1
    • Peel back the adhesive from one of the top corners.

    • We recommend to use only your hands to avoid damage to the battery.

  13. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 13、 1の画像 1
    • While you're peeling the adhesive back, be careful because the display is connected by a cable on the right.

  14. Zenithink ZTPAD ZT280 C91 Screen Replacement: 手順 14、 1の画像 1
    • Using tweezers, slide back the latch and unplug the ribbon cable.

    • Remove the display from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Nicholas Davis

メンバー登録日: 09/21/18

345 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S6-G1, Thompson Fall 2018 University of North Texas, Team S6-G1, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S6G1

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 182