メインコンテンツにスキップ

はじめに

Before you begin this guide, make sure to have the proper tools. You will need a spudger, and a phillips head #00 screwdriver. If you're having trouble with the battery in your device, removing the back panel is one of the first steps in replacing the battery.

パーツ

パーツは指定されていません。

  1. Remove the two screws on the bottom using a Phillips #00 screwdriver.
    • Remove the two screws on the bottom using a Phillips #00 screwdriver.

    • For differentiation purposes, these screws are 4mm long.

  2. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  3. Using a spudger, start prying the case apart by working around the edge slowly. Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger. While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed
    • Using a spudger, start prying the case apart by working around the edge slowly.

    • Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger.

    • While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed

    • Be careful to not damage the speaker cables, they will still be connecting both panels.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Nicholas Davis

メンバー登録日: 2018年09月21日

318 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S6-G1, Thompson Fall 2018 University of North Texas, Team S6-G1, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S6G1

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 81