メインコンテンツにスキップ

ZTE Speed Motherboard Replacement

必要な工具と部品

  1. ZTE Speed Motherboard Replacement, Motherboard: 手順 1、 2の画像 1 ZTE Speed Motherboard Replacement, Motherboard: 手順 1、 2の画像 2
    • Pull off back cover at bottom right corner.

  2. ZTE Speed Motherboard Replacement: 手順 2、 2の画像 1 ZTE Speed Motherboard Replacement: 手順 2、 2の画像 2
    • Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

  3. ZTE Speed Motherboard Replacement: 手順 3、 2の画像 1 ZTE Speed Motherboard Replacement: 手順 3、 2の画像 2
    • With the plastic opening tool the spudger, gently pry off the inner back.

    • Be careful not to pry it off too hard, as it is just a plastic covering.

  4. ZTE Speed Motherboard Replacement: 手順 4、 1の画像 1
    • Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

  5. ZTE Speed Motherboard Replacement: 手順 5、 3の画像 1 ZTE Speed Motherboard Replacement: 手順 5、 3の画像 2 ZTE Speed Motherboard Replacement: 手順 5、 3の画像 3
    • Using the spudger, gently pry up all ZIF connectors

    • ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable

    • Using same spudger, gently pry up the orange flat top connector

  6. ZTE Speed Motherboard Replacement: 手順 6、 2の画像 1 ZTE Speed Motherboard Replacement: 手順 6、 2の画像 2
    • Carefully take off motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Garrett Barry

メンバー登録日: 03/04/16

722 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team 6-3, Bhusal Spring 2016 UMass Dartmouth, Team 6-3, Bhusal Spring 2016人のメンバー

UMASSD-BHUSAL-S16S6G3

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 694