メインコンテンツにスキップ

ZTE Jasper LTE Speaker Replacement

必要な工具と部品

  1. ZTE Jasper LTE Speaker Replacement, Battery: 手順 1、 1の画像 1
    • Insert the spudger into the bottom left corner of the phone.

    • Use the spudger to loosen the back cover.

  2. ZTE Jasper LTE Speaker Replacement: 手順 2、 1の画像 1
    • Insert the black spudger near the bottom left of the battery. There will be an opening to easily to remove the battery.

    • Continuing to use tool, prop up the battery and remove it.

  3. ZTE Jasper LTE Speaker Replacement, Camera: 手順 3、 2の画像 1 ZTE Jasper LTE Speaker Replacement, Camera: 手順 3、 2の画像 2
    • Remove nine 0.8mm Phillips #00 screws.

  4. ZTE Jasper LTE Speaker Replacement: 手順 4、 2の画像 1 ZTE Jasper LTE Speaker Replacement: 手順 4、 2の画像 2
    • Remove the back cover by pulling upwards.

    • Removing the back cover may take a bit of force.

  5. ZTE Jasper LTE Speaker Replacement: 手順 5、 3の画像 1 ZTE Jasper LTE Speaker Replacement: 手順 5、 3の画像 2 ZTE Jasper LTE Speaker Replacement: 手順 5、 3の画像 3
    • Disconnect the gold component attached to the camera by pulling upwards using the tweezers.

    • Remove the camera using the tweezers by gripping tightly around the camera and pulling upwards.

    • Camera is attached to the motherboard with adhesive. As such, you may need to use light force to remove the camera.

  6. ZTE Jasper LTE Speaker Replacement, Speaker: 手順 6、 2の画像 1 ZTE Jasper LTE Speaker Replacement, Speaker: 手順 6、 2の画像 2
    • Remove the speaker using the tweezers by gripping each side and pulling upwards.

    • Speaker is attached to the back case with adhesive. As such, you may need to use light force to remove the speaker.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Anthony Sou

メンバー登録日: 04/22/19

391 ポイント

4のガイドは作成済み

チーム

UW Tacoma, Team S1-G1, Cardinal Spring 2019 UW Tacoma, Team S1-G1, Cardinal Spring 2019人のメンバー

UWT-CARDINAL-S19S1G1

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 4

過去 30 日: 5

今までの合計 113