メインコンテンツにスキップ

Yuneec ST16S Speaker Replacement

必要な工具と部品

  1. Yuneec ST16S Speaker Replacement, Battery: 手順 1、 1の画像 1
    • Hold down the button located above the battery while applying downward pressure to the battery.

  2. Yuneec ST16S Speaker Replacement: 手順 2、 2の画像 1 Yuneec ST16S Speaker Replacement: 手順 2、 2の画像 2
    • While still holding down the button, slide the battery out of its slot.

  3. Yuneec ST16S Speaker Replacement, Backplate: 手順 3、 1の画像 1
    • Remove the single screw from the battery compartment.

  4. Yuneec ST16S Speaker Replacement: 手順 4、 2の画像 1 Yuneec ST16S Speaker Replacement: 手順 4、 2の画像 2
    • Remove the rubber bumpers from the back of the device using a spudger.

  5. Yuneec ST16S Speaker Replacement: 手順 5、 2の画像 1 Yuneec ST16S Speaker Replacement: 手順 5、 2の画像 2
    • Remove the two screws located under each of the rubber bumpers.

  6. Yuneec ST16S Speaker Replacement: 手順 6、 3の画像 1 Yuneec ST16S Speaker Replacement: 手順 6、 3の画像 2 Yuneec ST16S Speaker Replacement: 手順 6、 3の画像 3
    • Remove the three screws along the top of the device.

  7. Yuneec ST16S Speaker Replacement: 手順 7、 2の画像 1 Yuneec ST16S Speaker Replacement: 手順 7、 2の画像 2
    • Carefully remove the backplate from the device.

  8. Yuneec ST16S Speaker Replacement, Speaker: 手順 8、 1の画像 1
    • Remove the four screws from around the speaker and remove the plastic cover.

  9. Yuneec ST16S Speaker Replacement: 手順 9、 1の画像 1
    • Unplug the speaker and remove it from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Christian Resendes

メンバー登録日: 10/28/21

589 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021 UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021人のメンバー

UMASSD-GULBRANDSEN-F21S4G2

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 68