メインコンテンツにスキップ

Yujin Robot iCLEBO Arte Battery Replacement Guide

必要な工具と部品

  1. Yujin Robot iCLEBO Arte Battery Replacement Guide, Battery: 手順 1、 3の画像 1 Yujin Robot iCLEBO Arte Battery Replacement Guide, Battery: 手順 1、 3の画像 2 Yujin Robot iCLEBO Arte Battery Replacement Guide, Battery: 手順 1、 3の画像 3
    • Locate and unscrew the two 15mm screws with a Phillips #2 screwdriver.

  2. Yujin Robot iCLEBO Arte Battery Replacement Guide: 手順 2、 3の画像 1 Yujin Robot iCLEBO Arte Battery Replacement Guide: 手順 2、 3の画像 2 Yujin Robot iCLEBO Arte Battery Replacement Guide: 手順 2、 3の画像 3
    • Remove both screws shown by rotating them counter-clockwise.

  3. Yujin Robot iCLEBO Arte Battery Replacement Guide: 手順 3、 1の画像 1
    • Remove the battery compartment's lid.

  4. Yujin Robot iCLEBO Arte Battery Replacement Guide: 手順 4、 2の画像 1 Yujin Robot iCLEBO Arte Battery Replacement Guide: 手順 4、 2の画像 2
    • Slide the battery out, and disconnect it from the robot by squeezing the tab on the power cable.

    • If you pull too hard on the connector without properly squeezing the tab, something will break.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Trent Bingel

メンバー登録日: 02/28/17

428 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team S2-G3, Nance Spring 2017 USF Tampa, Team S2-G3, Nance Spring 2017人のメンバー

USFT-NANCE-S17S2G3

4 メンバー

14のガイドは作成済み

コメント 1 件

Tried 2 different new batteries and still won’t charge

desrn55 - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 7

過去 30 日: 23

今までの合計 2,726