はじめに
If your camera of the YOTON YB02 isn’t producing clear audio, such as distorted or no sound, use this guide to replace the camera speaker of the baby monitor. The camera speaker transmits sound from the user of the monitor through a wireless connection. A faulty camera speaker will produce poor, distorted, or zero audio. Before replacing the camera speaker, make sure to clean any debris collected in the speaker holes as accumulations of dust can distort audio. Before beginning, make sure to completely turn off your device.
必要な工具と部品
-
-
Use a Phillips #0 screwdriver to remove the single 7 mm screw from the back of the panel from the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.