メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ツール

パーツ

  1. Turn off the cell phone and remove the SIM card.
    • Turn off the cell phone and remove the SIM card.

  2. Place on top of a hot plate on soften the adhesive on the back cover (no more than 90ºc  of heat). You can also use a heat gun, but be careful not to overdo it.
    • Place on top of a hot plate on soften the adhesive on the back cover (no more than 90ºc of heat). You can also use a heat gun, but be careful not to overdo it.

  3. Use a razor or a piece of plastic to take off the cover. Watch out! It is very fragile, use a lot of caution.  Be careful with the flex cable. Do not insert the blade too far or you can cut it.
    • Use a razor or a piece of plastic to take off the cover. Watch out! It is very fragile, use a lot of caution. Be careful with the flex cable. Do not insert the blade too far or you can cut it.

  4. 今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る

    今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る
  5. Lift the cover from right to left, but do not do it completely while the flex cable is still connected. Unscrew the seven screws and place them as in the image. Lift the cover from right to left, but do not do it completely while the flex cable is still connected. Unscrew the seven screws and place them as in the image.
    • Lift the cover from right to left, but do not do it completely while the flex cable is still connected. Unscrew the seven screws and place them as in the image.

  6. Unscrew the eight screws that fasten the bottom speaker. This step isn't necessary but it makes it much easier to pull the adhesive on the battery. Unscrew the eight screws that fasten the bottom speaker. This step isn't necessary but it makes it much easier to pull the adhesive on the battery.
    • Unscrew the eight screws that fasten the bottom speaker. This step isn't necessary but it makes it much easier to pull the adhesive on the battery.

  7. Carefully pull the two adhesives that attatch the battery to the middle frame. Carefully pull the two adhesives that attatch the battery to the middle frame.
    • Carefully pull the two adhesives that attatch the battery to the middle frame.

  8. Place the screen on the plate (apply heat), separate the screen from under as you have done with the back cover Place the screen on the plate (apply heat), separate the screen from under as you have done with the back cover
    • Place the screen on the plate (apply heat), separate the screen from under as you have done with the back cover

  9. Congratulations, you have finished. To mount the new screen continue the guide in reverse.
    • Congratulations, you have finished. To mount the new screen continue the guide in reverse.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

以下の翻訳者の皆さんにお礼を申し上げます:

100%

これらの翻訳者の方々は世界を修理する私たちのサポートをしてくれています。 あなたも貢献してみませんか?
翻訳を始める ›

Kefelegn Derbew

メンバー登録日: 2014年06月23日

319 ポイント

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 254