メインコンテンツにスキップ

はじめに

This guide offers instructions on how to replace cracked or split trigger caps in the Xbox One Wireless Controller (model 1708).

Trigger caps are pressable controls that often vibrate to provide feedback during gameplay. A cracked or split trigger cap will get jammed and will prevent the trigger motor from performing its intended function.

This guide is intended for trigger cap replacement only.

Before using this guide, examine the plastic trigger caps for any noticeable exterior damage. If you can see the trigger motors beneath the caps, this is the guide for you.

Make sure you have the proper tools and parts for this replacement and make sure your device is turned off before you begin.

パーツ

パーツは指定されていません。

  1. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement, Trigger Caps: 手順 1、 2の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement, Trigger Caps: 手順 1、 2の画像 2
    • Slide the battery cover out and remove it.

    • Remove the battery pack.

  2. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 2、 3の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 2、 3の画像 2 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 2、 3の画像 3
    • Insert a plastic opening tool between the handle and the plate.

    • Gently slide the opening tool from the top end to the bottom end of the seam to remove the plate from the handle.

    • Repeat the process with the other side plate.

    • The plate is tightly sealed on the handle, so it may be difficult to remove.

  3. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 3、 2の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 3、 2の画像 2
    • Remove the five 2.3mm screws on the bottom plate with a T8 Torx security Screwdriver.

    • If there is a sticker on the back, poke a hole with the screwdriver to get to the fifth screw.

  4. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 4、 2の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 4、 2の画像 2
    • Remove the bottom plate.

  5. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 5、 3の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 5、 3の画像 2 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 5、 3の画像 3
    • Carefully turn over the controller with the front plate facing you.

    • Remove the front plate.

  6. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 6、 3の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 6、 3の画像 2 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 6、 3の画像 3
    • Remove the two 1.7mm screws from each of the triggers with a T6 Torx screwdriver.

    • It is best to do one trigger cap replacement at a time.

  7. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 7、 3の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 7、 3の画像 2 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 7、 3の画像 3
    • Be careful not to let the trigger motor inside come out.

    • Lift the trigger cap off the trigger motor.

  8. Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 8、 3の画像 1 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 8、 3の画像 2 Xbox One Wireless Controller Model 1708 Trigger Caps Replacement: 手順 8、 3の画像 3
    • Place the new trigger cap on the trigger motor.

    • Push down the inside of the trigger cap until you hear a click.

    • Repeat step six to eight for the other trigger cap.

終わりに

To reassemble your device, follow steps 1-5 in reverse order.

14 の人々がこのガイドを完成させました。

Lucero Cortes-Vitervo

メンバー登録日: 2020年02月18日

451 ポイント

1ガイドが承認済み

チーム

UC Davis, Team S1-G6, Andersen Winter 2020 UC Davis, Team S1-G6, Andersen Winter 2020人のメンバー

UCD-ANDERSEN-W20S1G6

3 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 12

過去 7 日: 85

過去 30 日: 438

今までの合計 10,519