メインコンテンツにスキップ

Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement

必要な工具と部品

  1. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement, Bumper: 手順 1、 1の画像 1
    • Remove the battery cover.

    • Remove batteries.

  2. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 2、 3の画像 1 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 2、 3の画像 2 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 2、 3の画像 3
    • Grip the controller firmly to remove the side handle cover.

    • Use a flathead screwdriver or a spudger to wedge between the seams of the front to the side handle of the controller.

    • Move the flathead screwdriver all the way around the side plates seam and push the plate forward.

  3. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 3、 2の画像 1 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 3、 2の画像 2
    • Use a screwdriver and punch a hole directly in the center label. There you will find a hidden screw.

    • Remove the five 10mm screws located on the back of the controller using a T8 screwdriver.

  4. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 4、 2の画像 1 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 4、 2の画像 2
    • Remove the backplate.

    Comment je galère de ouf pour remettre la coque arrière. J'arrive plus aligner la prise Jack ?

    nawack de Marseille - 返信

  5. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 5、 2の画像 1 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 5、 2の画像 2
    • Remove the faceplate.

  6. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 6、 3の画像 1 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 6、 3の画像 2 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 6、 3の画像 3
    • Remove the cover piece surrounding the Xbox button off of its pegs.

    • Firmly hold controller and push cover piece up from the pegs.

    • Press the Xbox button down to assist in the unclipping of the piece.

  7. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 7、 2の画像 1 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 7、 2の画像 2
    • Remove the broken bumper by unclipping it from its pegs.

    • Hold the controller firmly and push the bumper piece up from its pegs to unclip.

  8. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 8、 3の画像 1 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 8、 3の画像 2 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: 手順 8、 3の画像 3
    • Align the replacement bumper onto the pegs, push gently and click into place.

終わりに

To reassemble your device, follow these instructions in reverse order.

19 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Cristyne Ramirez

メンバー登録日: 01/24/18

571 ポイント

1ガイドが承認済み

チーム

USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2018 USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2018人のメンバー

USFSM-STEWART-S18S1G1

15 メンバー

25のガイドは作成済み

2 件のコメント

On my controller the screws were T8 security type, so you'll need bits with a hole in the middle

Sean H - 返信

Is there a way to do this without removing all of the front and grip.

Alan Marantos - 返信

コメントを追加

統計データ:

過去 24時間: 16

過去 7 日: 157

過去 30 日: 747

今までの合計 46,572