Xbox 360 Motherboard Replacement - iFixit 修理ガイド

はじめに

This guide is an internal prereq.

必要な工具と部品

手順1 Motherboard

Xbox 360 Motherboard Replacement, Motherboard: 手順 1、 3の画像 1

Xbox 360 Motherboard Replacement, Motherboard: 手順 1、 3の画像 2

Xbox 360 Motherboard Replacement, Motherboard: 手順 1、 3の画像 3

Use the flat end of a spudger to release the clips securing the RF module shield along the top and the left edge of the RF module.
It may be easier to use your fingernail to release the clips from the RF module.
Remove the RF module shield from the console.

手順2

Xbox 360 Motherboard Replacement: 手順 2、 1の画像 1

Remove three 5.6 mm T8 Torx screws securing the RF module to the metal chassis.

手順3

Xbox 360 Motherboard Replacement: 手順 3、 2の画像 1

Xbox 360 Motherboard Replacement: 手順 3、 2の画像 2

Grasp the RF module and lift it straight up to disconnect it from its socket on the motherboard.
Remove the RF module from the console.

手順4

Xbox 360 Motherboard Replacement: 手順 4、 1の画像 1

Remove the following screws securing the motherboard to the metal casing:
Nine gold 11 mm T10 Torx screws.
Eight black 5.6 mm T8 Torx screws.
If you are reassembling your Xbox 360 after installing the Red Ring of Death Fix Kit, the eight T8 Torx screws circled in orange are not reused.

手順5

Xbox 360 Motherboard Replacement: 手順 5、 2の画像 1

Xbox 360 Motherboard Replacement: 手順 5、 2の画像 2

Turn the Xbox over, being careful not to let the motherboard fall out of the chassis.
Lift the motherboard assembly from its front edge.
Be careful not to damage the sockets as you rotate the motherboard away from the metal casing.
Remove the motherboard assembly from the metal casing.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Walter Galan

694,676 ポイント

1,203のガイドは作成済み

+51 個以上のバッジ

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,072