メインコンテンツにスキップ

X-Street STR Viper Remote Control Motherboard Replacement

必要な工具と部品

  1. X-Street STR Viper Remote Control Motherboard Replacement, Remote Control Motherboard: 手順 1、 1の画像 1
    • Turn off the remote control. Flip power switch to the off position.

    • Remove the battery from bottom of the remote control for further safety measures.

  2. X-Street STR Viper Remote Control Motherboard Replacement: 手順 2、 1の画像 1
    • Remove all seven 3mm Phillips #2 screws from the underside panel.

  3. X-Street STR Viper Remote Control Motherboard Replacement: 手順 3、 1の画像 1
    • Remove five 3mm Phillips #2 screws that connect the motherboard to the back outer shell.

  4. X-Street STR Viper Remote Control Motherboard Replacement: 手順 4、 1の画像 1
    • Detach the motherboard. Use soldering tools to desolder the red and black wires from the motherboard. To do this, refer to the how to solder/desolder page.

  5. X-Street STR Viper Remote Control Motherboard Replacement: 手順 5、 1の画像 1
    • Replace the motherboard. Solder the wires back on to the new motherboard using the soldering kit. The black wire should be on the left and the red wire should be on the right.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

7人の作成者と共同で作成されました。

Cate Kraska

メンバー登録日: 04/01/15

129 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 12-6, Lancaster Spring 2015 Cal Poly, Team 12-6, Lancaster Spring 2015人のメンバー

CPSU-LANCASTER-S15S12G6

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 652