メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

The WowWee MiP robot has a tendency towards short battery life. If the MiP seems too slow or stops responding, use this guide to change the MiP’s batteries. The MiP’s batteries are located in a battery pack on the robot's back.

パーツ

パーツは指定されていません。

  1. Remove the three 12.0 mm Phillips # 2 screws from the battery cover. Remove the three 12.0 mm Phillips # 2 screws from the battery cover.
    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

  2. Carefully pull the battery pack from the robot. Remove the batteries from the battery pack.
    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Moira Keahon

メンバー登録日: 2014年09月24日

250 ポイント

3のガイドは作成済み

チーム

University of Maine, Team 1-50, Diaz Fall 2014 University of Maine, Team 1-50, Diaz Fall 2014人のメンバー

UMAINE-DIAZ-F14S1G50

3 メンバー

3のガイドは作成済み

11 件のコメント

Its a programmer MIP not this kind.

Azariah Trumble - 返信

Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.

Gil Acosta - 返信

does spare battery adapter vailable(not reachargeable)

coolboyz' channel - 返信

Coder Mip Battery says fully charged - but Coder Mip doesnt turn on?

Sadie - 返信

Coder MiP one day old - was working - battery says fully charged - but Coder MiP doesn’t turn on? Any suggestions?

Sadie - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 24

今までの合計 10,557