メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

WowWee MiP Robot Speaker Replacement

必要な工具と部品

  1. WowWee MiP Robot  Speaker Replacement, Battery: 手順 1、 2の画像 1 WowWee MiP Robot  Speaker Replacement, Battery: 手順 1、 2の画像 2
    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

  2. WowWee MiP Robot  Speaker Replacement: 手順 2、 2の画像 1 WowWee MiP Robot  Speaker Replacement: 手順 2、 2の画像 2
    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

  3. WowWee MiP Robot  Speaker Replacement, Wheel: 手順 3、 2の画像 1 WowWee MiP Robot  Speaker Replacement, Wheel: 手順 3、 2の画像 2
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  4. WowWee MiP Robot  Speaker Replacement: 手順 4、 2の画像 1 WowWee MiP Robot  Speaker Replacement: 手順 4、 2の画像 2
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  5. WowWee MiP Robot  Speaker Replacement: 手順 5、 1の画像 1
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

  6. WowWee MiP Robot  Speaker Replacement, WowWee MiP Robot Body Disassembly: 手順 6、 2の画像 1 WowWee MiP Robot  Speaker Replacement, WowWee MiP Robot Body Disassembly: 手順 6、 2の画像 2
    • Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.

  7. WowWee MiP Robot  Speaker Replacement: 手順 7、 3の画像 1 WowWee MiP Robot  Speaker Replacement: 手順 7、 3の画像 2 WowWee MiP Robot  Speaker Replacement: 手順 7、 3の画像 3
    • Remove the arms from the body.

    • Carefully open the body compartment.

    • Open the compartment slowly. There are wires connecting the two body pieces together. If pulled too hard, the wires and/or the motherboard could be damaged.

  8. WowWee MiP Robot  Speaker Replacement: 手順 8、 1の画像 1
    • Using precision tweezers, disconnect the following three bundles of wires:

    • Connecting the battery pack to the motherboard.

    • Connecting the power switch to the motherboard.

    • Connecting the speaker to the motherboard.

  9. WowWee MiP Robot  Speaker Replacement, Speaker: 手順 9、 2の画像 1 WowWee MiP Robot  Speaker Replacement, Speaker: 手順 9、 2の画像 2
    • Remove the two 7.5 mm Phillips #1 screws holding the speaker bracket in place.

  10. WowWee MiP Robot  Speaker Replacement: 手順 10、 1の画像 1
    • Remove the plastic bracket covering the speaker.

  11. WowWee MiP Robot  Speaker Replacement: 手順 11、 1の画像 1
    • Gently remove the speaker from the MiP.

    • During reassembly, be sure to place the speaker in the same position.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Daniel Burkholder

メンバー登録日: 02/16/16

623 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team 3-4, Wollert Spring 2016 USF Tampa, Team 3-4, Wollert Spring 2016人のメンバー

USFT-WOLLERT-S16S3G4

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 516