パーツ

パーツは必要ありません。

  1. Place CHiP on its back so that its stomach is facing you.
    • Place CHiP on its back so that its stomach is facing you.

  2. There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.
    • There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.

    • Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.

    • Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.

    • Locate wheel to replace.

    • Twist grey wheel cap in counter-clockwise rotation.

    • Pull and remove wheel.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Joseph Dantes

メンバー登録日: 2018年10月02日

454 ポイント

4のガイドは作成済み

チーム

Linn Benton Community College, Team S1-G5, Johnson Fall 2018 Linn Benton Community College, Team S1-G5, Johnson Fall 2018人のメンバー

LBCC-JOHNSON-F18S1G5

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 7

過去 30 日: 53

今までの合計 85