パーツ

パーツは必要ありません。

  1. Place the Smart Watch on its back or side so that the full watch band is visible. Place the Smart Watch on its back or side so that the full watch band is visible.
    • Place the Smart Watch on its back or side so that the full watch band is visible.

  2. Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.
    • Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Remove the four screws in the back of the watch using a Phillips #0 screwdriver.
    • Remove the four screws in the back of the watch using a Phillips #0 screwdriver.

  5. Gently pull off the back side of the watch component.
    • Gently pull off the back side of the watch component.

  6. Pull the battery and motherboard component out.
    • Pull the battery and motherboard component out.

まとめ

To reassemble your device, follow these instructions in reverse order.

Joseph Dantes

メンバー登録日: 2018年10月02日

454 ポイント

4のガイドは作成済み

チーム

Linn Benton Community College, Team S1-G5, Johnson Fall 2018 Linn Benton Community College, Team S1-G5, Johnson Fall 2018人のメンバー

LBCC-JOHNSON-F18S1G5

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 10

過去 30 日: 40

今までの合計 180