メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

World Dryer Airforce J4-973A3 Motor Replacement

必要な工具と部品

  1. World Dryer Airforce J4-973A3 Motor Replacement, Motor: 手順 1、 3の画像 1 World Dryer Airforce J4-973A3 Motor Replacement, Motor: 手順 1、 3の画像 2 World Dryer Airforce J4-973A3 Motor Replacement, Motor: 手順 1、 3の画像 3
    • To change the motor, start by removing the metal casing.

    • Using the special bit, remove the large screws at the bottom of the casing.

    • To remove the case, lift the indicated spot with your hands.

    • The direction for turning the screws is different than what was indicated on the small sticker above the hole.

  2. World Dryer Airforce J4-973A3 Motor Replacement: 手順 2、 3の画像 1 World Dryer Airforce J4-973A3 Motor Replacement: 手順 2、 3の画像 2 World Dryer Airforce J4-973A3 Motor Replacement: 手順 2、 3の画像 3
    • Remove the three 1/2" Ph1 screws at the bottom of the red fan cap.

    • Turn over the device.

    • Push the red tabs on the back of the unit with medium to heavy pressure, using a small prier.

    • Carefully remove the cap, to prevent damage to the sensor.

  3. World Dryer Airforce J4-973A3 Motor Replacement: 手順 3、 2の画像 1 World Dryer Airforce J4-973A3 Motor Replacement: 手順 3、 2の画像 2
    • Remove both 3/8" Ph2 screws attached to the grey belt at the top and bottom.

    • Lift the grey belt away. This gives access to the server board.

  4. World Dryer Airforce J4-973A3 Motor Replacement: 手順 4、 1の画像 1
    • Use a plastic opening tool to remove the two pink capped wires in the upper left corner of the server board.

  5. World Dryer Airforce J4-973A3 Motor Replacement: 手順 5、 3の画像 1 World Dryer Airforce J4-973A3 Motor Replacement: 手順 5、 3の画像 2 World Dryer Airforce J4-973A3 Motor Replacement: 手順 5、 3の画像 3
    • Remove the brass nut from its bolt using a 10mm wrench.

    • Once the nut is free, disconnect the green wire.

  6. World Dryer Airforce J4-973A3 Motor Replacement: 手順 6、 3の画像 1 World Dryer Airforce J4-973A3 Motor Replacement: 手順 6、 3の画像 2 World Dryer Airforce J4-973A3 Motor Replacement: 手順 6、 3の画像 3
    • Remove the rainbow ribbon cable using a plastic opening tool.

    • Remove the 1/2" Ph1 screw from the center of the circuit board.

  7. World Dryer Airforce J4-973A3 Motor Replacement: 手順 7、 3の画像 1 World Dryer Airforce J4-973A3 Motor Replacement: 手順 7、 3の画像 2 World Dryer Airforce J4-973A3 Motor Replacement: 手順 7、 3の画像 3
    • Remove the four 3/4" Ph2 screws from the back of the device body.

    • Separate the motor housing from the device body.

    • Ensure that all wires connecting the motor housing and motherboard are disconnected before removing the component.

  8. World Dryer Airforce J4-973A3 Motor Replacement: 手順 8、 3の画像 1 World Dryer Airforce J4-973A3 Motor Replacement: 手順 8、 3の画像 2 World Dryer Airforce J4-973A3 Motor Replacement: 手順 8、 3の画像 3
    • Remove the four 1/2" Ph2 screws from the filter.

    • Pull the filter plate away to reveal the motor.

  9. World Dryer Airforce J4-973A3 Motor Replacement: 手順 9、 3の画像 1 World Dryer Airforce J4-973A3 Motor Replacement: 手順 9、 3の画像 2 World Dryer Airforce J4-973A3 Motor Replacement: 手順 9、 3の画像 3
    • Pull the motor out of the housing.

    • Be sure to feed the wires through the slot as you pull the motor out.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Eli Forbes

メンバー登録日: 09/17/18

172 ポイント

1ガイドが承認済み

チーム

Washington State, Team S1-G6, Hope Fall 2018 Washington State, Team S1-G6, Hope Fall 2018人のメンバー

WSU-HOPE-F18S1G6

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 9

今までの合計 263