メインコンテンツにスキップ

Wolf Gourmet WGBL100S Control Board Replacement

必要な工具と部品

  1. Wolf Gourmet WGBL100S Control Board Replacement, Control Board: 手順 1、 2の画像 1 Wolf Gourmet WGBL100S Control Board Replacement, Control Board: 手順 1、 2の画像 2
    • Flip the base of the blender upside-down.

    • Remove the four 1/2" long screws in the corners of the base using a Phillips #2 screwdriver.

  2. Wolf Gourmet WGBL100S Control Board Replacement: 手順 2、 2の画像 1 Wolf Gourmet WGBL100S Control Board Replacement: 手順 2、 2の画像 2
    • Using the metal spudger, pry off one half of each rubber foot.

    • Note that one side of the foot is glued down; pry off the other side.

  3. Wolf Gourmet WGBL100S Control Board Replacement: 手順 3、 1の画像 1
    • Using the same screwdriver, remove the next four 1/2" long screws in the holes under the feet.

    • Pull the base off of the blender.

  4. Wolf Gourmet WGBL100S Control Board Replacement: 手順 4、 2の画像 1 Wolf Gourmet WGBL100S Control Board Replacement: 手順 4、 2の画像 2
    • Pull off the plastic housing.

  5. Wolf Gourmet WGBL100S Control Board Replacement: 手順 5、 2の画像 1 Wolf Gourmet WGBL100S Control Board Replacement: 手順 5、 2の画像 2
    • Using the same Phillips #2 screwdriver, remove the two 3/4" long screws holding the control board in place.

  6. Wolf Gourmet WGBL100S Control Board Replacement: 手順 6、 2の画像 1 Wolf Gourmet WGBL100S Control Board Replacement: 手順 6、 2の画像 2
    • Using pliers, pull off all the connectors on the top.

  7. Wolf Gourmet WGBL100S Control Board Replacement: 手順 7、 1の画像 1
    • Pull or pry off the last connector block, then remove the control board.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Cole Gillespie

メンバー登録日: 04/19/18

476 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team S25-G16, Maness Spring 2018 Cal Poly, Team S25-G16, Maness Spring 2018人のメンバー

CPSU-MANESS-S18S25G16

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 12

今までの合計 318