Wintec Filemate Clear 7" Battery Replacement

はじめに

in order to complete this guide, you will need to remove the battery, put a new one in its place, and solder the new connections onto the motherboard.

必要な工具と部品

手順1 Remove the Backplate

Wintec Filemate Clear 7" Battery Replacement, Remove the Backplate: 手順 1、 1の画像 1

Locate the four corners of the backplate.

編集

手順2

Pry off the backplate by inserting a spudger or plastic opening tool into each corner and popping them open.

編集

手順3 Remove the Battery

Wintec Filemate Clear 7" Battery Replacement, Remove the Battery: 手順 3、 1の画像 1

Un-stick the battery from the motherboard assembly with the plastic opening tool.

編集

手順4

Desolder the battery wires from the motherboard.
The tweezers pictured point to the two solder joints.

編集

手順5

Fully remove the battery from the device.

編集

終わりに

To reassemble your device, glue the new battery to where the old one was and solder the new power connectors where the old ones were. Then follow the instructions in reverse order.

3 の人々がこのガイドを完成させました。