メインコンテンツにスキップ

Wii Balance Board Foot Replacement

必要な工具と部品

  1. Wii Balance Board Foot Replacement, Unscrewing the Foot Cover: 手順 1、 1の画像 1
    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

  2. Wii Balance Board Foot Replacement, Removing the Foot Cover: 手順 2、 1の画像 1
    • Remove the gray plastic ring from the actual foot by lifting it up.

  3. Wii Balance Board Foot Replacement, Removing the Foot: 手順 3、 1の画像 1
    • Separate the loose foot from the device by lifting it up.

  4. Wii Balance Board Foot Replacement, Removing the Additional Feet: 手順 4、 1の画像 1
    • Repeat steps two and three on the remaining four feet.

    how to completely remove and then put back in would be helpful as that's what the title of this post is…. right?

    Nelda Murray - 返信

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

Cory Olson

メンバー登録日: 09/29/14

891 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 13-8, Forte Fall 2014 Cal Poly, Team 13-8, Forte Fall 2014人のメンバー

CPSU-FORTE-F14S13G8

5 メンバー

15のガイドは作成済み

2 件のコメント

I am in need of a foot cover. Where can I find one??

Marvin Hopper - 返信

This manual did not help

nbrown1959.nb - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 8

過去 30 日: 38

今までの合計 2,922