メインコンテンツにスキップ

Whirlpool WED87HED Dryer Power Cord Replacement

必要な工具と部品

  1. Whirlpool WED87HED Dryer Power Cord Replacement, Safety Precautions: 手順 1、 1の画像 1
    • Before you begin your repair, unplug your dryer.

    • Your power cord may have four prongs rather than three. The additional prong is a ground connection.

  2. Whirlpool WED87HED Dryer Power Cord Replacement, Unfasten the cover plate: 手順 2、 1の画像 1
    • Use a 5/16 inch nut driver to remove the 16.2 mm-long cover plate screw.

  3. Whirlpool WED87HED Dryer Power Cord Replacement, Remove the cover plate: 手順 3、 3の画像 1 Whirlpool WED87HED Dryer Power Cord Replacement, Remove the cover plate: 手順 3、 3の画像 2 Whirlpool WED87HED Dryer Power Cord Replacement, Remove the cover plate: 手順 3、 3の画像 3
    • Remove the cover plate.

  4. Whirlpool WED87HED Dryer Power Cord Replacement, Disconnect the cord: 手順 4、 1の画像 1
    • Mark the cables with a permanent marker if needed and take a picture or draw a diagram.

    • Use a Phillips driver or a 1/4 inch nut driver to remove the three 21.4 mm-long screws.

    • If your plug has 4 prongs, there will be a ground connection from the cord as well. Use a 5/16 inch nut driver to remove this connection.

  5. Whirlpool WED87HED Dryer Power Cord Replacement, Remove the cord: 手順 5、 3の画像 1 Whirlpool WED87HED Dryer Power Cord Replacement, Remove the cord: 手順 5、 3の画像 2 Whirlpool WED87HED Dryer Power Cord Replacement, Remove the cord: 手順 5、 3の画像 3
    • Pull the cord carefully down through the round hole.

    • Make sure you replace the connections correctly when you reassemble.

終わりに

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Ask our Answers community for help.

作成者

3人の作成者と共同で作成されました。

Bill Gilbert

メンバー登録日: 06/30/22

30,362 ポイント

213のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

137 メンバー

17,537のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 168