メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Water Damage on main board of Nokia 206 RM873

必要な工具と部品

  1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 手順 1、 3の画像 1 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 手順 1、 3の画像 2 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 手順 1、 3の画像 3
    • Remove back cover & battery.

  2. Water Damage on main board of Nokia 206 RM873: 手順 2、 2の画像 1 Water Damage on main board of Nokia 206 RM873: 手順 2、 2の画像 2
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

  3. Water Damage on main board of Nokia 206 RM873: 手順 3、 2の画像 1 Water Damage on main board of Nokia 206 RM873: 手順 3、 2の画像 2
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

  4. Water Damage on main board of Nokia 206 RM873: 手順 4、 3の画像 1 Water Damage on main board of Nokia 206 RM873: 手順 4、 3の画像 2 Water Damage on main board of Nokia 206 RM873: 手順 4、 3の画像 3
    • Remove keyboard by prying it open with a spudger.

    • The keyboard is secured with adhesive, be careful!

  5. Water Damage on main board of Nokia 206 RM873: 手順 5、 3の画像 1 Water Damage on main board of Nokia 206 RM873: 手順 5、 3の画像 2 Water Damage on main board of Nokia 206 RM873: 手順 5、 3の画像 3
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

  6. Water Damage on main board of Nokia 206 RM873: 手順 6、 2の画像 1 Water Damage on main board of Nokia 206 RM873: 手順 6、 2の画像 2
    • How and where to use the cotton swabs.

終わりに

To reassemble your device, follow these instructions in reverse order.

17 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Kevin D

メンバー登録日: 05/02/14

7,294 ポイント

21のガイドは作成済み

4 件のコメント

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - 返信

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - 返信

Nokia 206 display and charger pin

Mithilesh Yadav - 返信

Not working kiy 1.2.3 and colling ricev kiy not working

K .M Jugesh - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 13

過去 30 日: 36

今までの合計 10,778