はじめに

In this guide you will learn how to replace the chip set in a Wahl Lithium Ion Trimmer.

ツール

工具は必要ありません。

パーツ

Refer to the 4th step in Disassemble Guide which will expose the inside of the trimmer allowing access to the battery, electric motor and the chip set.
  • Refer to the 4th step in Disassemble Guide which will expose the inside of the trimmer allowing access to the battery, electric motor and the chip set.

コメントを追加する

Remover the motor, battery and chip set from the plastic casing.
  • Remover the motor, battery and chip set from the plastic casing.

コメントを追加する

Remove the white plastic piece and focus on removing the wires from the chip set. If necessary cut the wires as close to the chip set as possible that way you can reconnect them to the new one.
  • Remove the white plastic piece and focus on removing the wires from the chip set. If necessary cut the wires as close to the chip set as possible that way you can reconnect them to the new one.

コメントを追加する

Exchange the old chip set with the new one and reconnect the wires and white piece.
  • Exchange the old chip set with the new one and reconnect the wires and white piece.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

nathan

メンバー登録日: 2013年10月22日

1,129 ポイント

6のガイドは作成済み

チーム

University of Maryland, Team 1-3, Shastany Fall 2013 University of Maryland, Team 1-3, Shastany Fall 2013人のメンバー

UMD-SHASTANY-F13S1G3

3 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 4

過去 7 日: 6

過去 30 日: 27

今までの合計 1,923