修理を始めるには コミュニティ ストア

Wacom Bamboo Pen And Touch Disassembly

はじめに

Wacom CTH-460 Bamboo Pen & Touch is a fairly easy device to disassemble, requiring only a Phillips #000 screwdriver and tweezers or similar tool to pry adhered and clipped elements.

The only fragile elements are flex cables connecting the touch digitizer to the mainboard.

If you plan on replacing the USB cable, please note that the USB cable is soldered to the mainboard.

必要な工具と部品

  1. Wacom Bamboo Pen And Touch Disassembly, Wacom Bamboo Pen And Touch Disassembly: 手順 1、 2の画像 1 Wacom Bamboo Pen And Touch Disassembly, Wacom Bamboo Pen And Touch Disassembly: 手順 1、 2の画像 2

    • Place the device facing bottom part up.

    • Make sure the working surface won't scratch the surface of the tablet

    編集

  2. Wacom Bamboo Pen And Touch Disassembly: 手順 2、 2の画像 1 Wacom Bamboo Pen And Touch Disassembly: 手順 2、 2の画像 2
    この手順で使用する道具：
    Tweezers
    $4.99
    購入する

    • Remove 4 rubber feet using a spudger or a pair of tweezers

    • Unscrew 4 #000 Phillips screws

    編集

  3. Wacom Bamboo Pen And Touch Disassembly: 手順 3、 1の画像 1

    • Use spudger or other prying tool to open the tablet.

    • The clips are located all around the perimeter of the tablet

    • The parts inside are attached to the top part of the device

    編集

  5. Wacom Bamboo Pen And Touch Disassembly: 手順 4、 1の画像 1

    • Remove the cable.

    • Do not pull the cable with force - it is soldered to the mainboard

    編集

  6. Wacom Bamboo Pen And Touch Disassembly: 手順 5、 1の画像 1

    • While the pen holder might seem permamently riveted, it can be removed and cleaned

    • Press firmly around the rivets to re-attach it

    編集

  7. Wacom Bamboo Pen And Touch Disassembly: 手順 6、 3の画像 1 Wacom Bamboo Pen And Touch Disassembly: 手順 6、 3の画像 2 Wacom Bamboo Pen And Touch Disassembly: 手順 6、 3の画像 3

    • Unclip 3 flex cable connectors

    • The clips are fragile.

    • Unlocked connector's latch is in vertical position.

    • Due to fragiility of flex cables, it's better to remove the adhesive strips only from the mainboard and leave the attached adhesvie strips to the flex cable as is.

    編集

  8. Wacom Bamboo Pen And Touch Disassembly: 手順 7、 3の画像 1 Wacom Bamboo Pen And Touch Disassembly: 手順 7、 3の画像 2 Wacom Bamboo Pen And Touch Disassembly: 手順 7、 3の画像 3

    • The mainboard is now loose and can be removed.

    • The mainboard contains a fuse, visible in the second image in the gallery.

    • Replacement of touch digitizer requires removing the top sticker.This procedure is not a part of this guide, and it might permamently destroy the working surface of the tablet.

    • USB Cable is soldered to the mainboard

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

00004707

メンバー登録日: 07/23/20

1,055 ポイント

5のガイドは作成済み

バッジ: 9

+6 個以上のバッジ

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 9

過去 30 日: 38

今までの合計 346