メインコンテンツにスキップ

Vixen 21 Oil Cooler Replacement

必要な工具と部品

  1. Vixen 21 Oil Cooler Replacement, Oil Cooler: 手順 1、 1の画像 1
    • After removing the side panel, it's clear that my oil cooler has been leaking for a while. Fortunately, AFAB sells a complete replacement kit including a new oil cooler and new hoses!

  2. Vixen 21 Oil Cooler Replacement: 手順 2、 3の画像 1 Vixen 21 Oil Cooler Replacement: 手順 2、 3の画像 2 Vixen 21 Oil Cooler Replacement: 手順 2、 3の画像 3
    • The tail light covers come off easy enough with 10 screws and a single connector.

    • The white housing beneath comes off with a bolt on the left and a screw on the right.

  3. Vixen 21 Oil Cooler Replacement: 手順 3、 2の画像 1 Vixen 21 Oil Cooler Replacement: 手順 3、 2の画像 2
    • On my Vixen there was a hex head bolt on the top right, and a on-its-way-to-being-stripped Phillips head bolt on the top left.

  4. Vixen 21 Oil Cooler Replacement: 手順 4、 1の画像 1
    • There were two Phillips screws in the bottom of the panel, but these weren't actually attached to anything.

    • My new side-routed exhaust definitely made it harder to get this panel out.

  5. Vixen 21 Oil Cooler Replacement: 手順 5、 1の画像 1
    • There's one electrical plug and 4 obvious hex bolts to remove the condenser fan.

  6. Vixen 21 Oil Cooler Replacement: 手順 6、 2の画像 1 Vixen 21 Oil Cooler Replacement: 手順 6、 2の画像 2
    • Once the condenser fan is removed we can get a good look at the oil cooler. The fittings are certainly leaking, but the cooler itself might actually be fine.

    • The Vixen bleeds black and I bleed red, whoops!

  7. Vixen 21 Oil Cooler Replacement: 手順 7、 2の画像 1 Vixen 21 Oil Cooler Replacement: 手順 7、 2の画像 2
    • Here's all the shiny new replacement parts. You can buy the oil cooler kit from AFAB.

    • I made a mess of the threads putting one of the blue aluminum fittings in to the top of the new oil cooler. Thanks to a 1/2" NPT tap and die from Harbor Freight and a friend's help I was able to salvage it and I don't think it leaks, but time will tell...

  8. Vixen 21 Oil Cooler Replacement: 手順 8、 3の画像 1 Vixen 21 Oil Cooler Replacement: 手順 8、 3の画像 2 Vixen 21 Oil Cooler Replacement: 手順 8、 3の画像 3
    • On a closer inspection, all my existing fittings are leaking, which at this point I suppose is a good sign.

  9. Vixen 21 Oil Cooler Replacement: 手順 9、 1の画像 1
    • Getting the oil cooler off the condenser was easy, there's just two bolts. But it's still attached to the engine...

  10. Vixen 21 Oil Cooler Replacement: 手順 10、 2の画像 1 Vixen 21 Oil Cooler Replacement: 手順 10、 2の画像 2
    • It was easy enough to loosen the hose clamps and pop the hoses off.

    • This made a mess, because not surprisingly, there's oil in the lines.

  11. Vixen 21 Oil Cooler Replacement: 手順 11、 1の画像 1
    • The old oil cooler is out!

  12. Vixen 21 Oil Cooler Replacement: 手順 12、 3の画像 1 Vixen 21 Oil Cooler Replacement: 手順 12、 3の画像 2 Vixen 21 Oil Cooler Replacement: 手順 12、 3の画像 3
    • There was a lot of oil/dust sludge beneath the oil cooler, requiring a rather dirty cleanup.

  13. Vixen 21 Oil Cooler Replacement: 手順 13、 3の画像 1 Vixen 21 Oil Cooler Replacement: 手順 13、 3の画像 2 Vixen 21 Oil Cooler Replacement: 手順 13、 3の画像 3
    • Removing the remaining couplers was quite challenging.

    • I was able to borrow some large metric wrenches (24 mm and 27 mm) from a friend to help with this step.

  14. Vixen 21 Oil Cooler Replacement: 手順 14、 3の画像 1 Vixen 21 Oil Cooler Replacement: 手順 14、 3の画像 2 Vixen 21 Oil Cooler Replacement: 手順 14、 3の画像 3
    • After the first fitting was off, I was able to get a 24 mm socket over the second one to remove the fitting.

  15. Vixen 21 Oil Cooler Replacement: 手順 15、 2の画像 1 Vixen 21 Oil Cooler Replacement: 手順 15、 2の画像 2
    • I routed the new lines the same as the old ones.

    • The plastic lining the hole the hoses go through is definitely decaying, but seems like it'll still protect the hoses ok.

  16. Vixen 21 Oil Cooler Replacement: 手順 16、 2の画像 1 Vixen 21 Oil Cooler Replacement: 手順 16、 2の画像 2
    • The lines are just barely long enough, but it reaches!

  17. Vixen 21 Oil Cooler Replacement: 手順 17、 3の画像 1 Vixen 21 Oil Cooler Replacement: 手順 17、 3の画像 2 Vixen 21 Oil Cooler Replacement: 手順 17、 3の画像 3
    • Mounting to the condenser is straightforward.

  18. Vixen 21 Oil Cooler Replacement: 手順 18、 2の画像 1 Vixen 21 Oil Cooler Replacement: 手順 18、 2の画像 2
    • Everything's in place!

    • I spent some more time cleaning the dirty panel below. Thus far I have no leaks from the new oil cooler!

終わりに

To reassemble your device, follow these instructions in reverse order.

Luke Soules

106,908 ポイント

21のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

136 メンバー

16,560のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 24

今までの合計 928