メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

If your wristband has visible damage, is worn, torn or broken the following guide will help you repair your problem.

パーツ

パーツは指定されていません。

  1. Begin by placing the watch on its side.
    • Begin by placing the watch on its side.

  2. Next, use the flat end of the spudger to wedge between  the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.
    • Next, use the flat end of the spudger to wedge between the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.

  3. Pull the pin out, however not fully, feeling slight resistance is normal.
    • Pull the pin out, however not fully, feeling slight resistance is normal.

  4. Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.
    • Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.

終わりに

To reassemble your device, follow these instructions in reverse order.

Sydney

メンバー登録日: 2018年10月25日

272 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team S3-G5, Peak Fall 2018 UMass Dartmouth, Team S3-G5, Peak Fall 2018人のメンバー

UMASSD-PEAK-F18S3G5

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 9

過去 30 日: 76

今までの合計 675