VTech Kidizoom Camera Connect Front Case Replacement

はじめに

In order to repair or replace most parts of your VTech Kidizoom Camera Connect you'll need to be able to open the device. This guide gives step by step instructions on how to carefully open the main body of the Kidizoom Camera Connect and replace the front case.

必要な工具と部品

手順1 Front Case

VTech Kidizoom Camera Connect Front Case Replacement, Front Case: 手順 1、 2の画像 1

VTech Kidizoom Camera Connect Front Case Replacement, Front Case: 手順 1、 2の画像 2

Remove batteries and SD card before beginning disassembly!
Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.

翻訳

手順2

Remove all four (11mm) screws with the Philips #0 screwdriver.

翻訳

手順3

VTech Kidizoom Camera Connect Front Case Replacement: 手順 3、 3の画像 3

Remove the two battery cartridges located on the underside of the camera.
Once cartridges are removed, use the metal spudger to pry open the top, bottom, and both sides of the camera.

翻訳

手順4

Beware of the two black viewfinder lens falling out as you pry open the device!
The device should now be open and ready for further repair and/or replacement parts.

翻訳