はじめに
Over time, the wheels on roller skates can wear down, affecting your ability to skate smoothly and safely. Whether you're an avid skater or just getting started, learning how to replace your wheels is an important maintenance skill that can extend the life of your skates. This guide will walk you through the process of replacing the wheels on VNLA Parfait roller skates. With the right tools and a few simple steps, you'll have your skates ready to roll in no time.
必要な工具と部品
-
-
Use the PowerDyne Y3 Skate Tool to loosen the axle nuts on the first wheel by turning counterclockwise.
-
Keep the nuts in a safe place, as you will reuse them.
-
-
-
-
Slide the old wheel straight off the axle once the nut is removed.
-
Repeat the process for all wheels.
-
-
-
Place a bearing into the Bones Bearing Press/Puller and align it with the center of the new wheel.
-
Press down evenly and firmly until the bearing is fully seated.
-
Flip the wheel and repeat for the second bearing.
-
Do this for all wheels.
-
-
-
Slide the new wheels onto the skate axles.
-
Secure each wheel with the axle nut, turning it clockwise with the PowerDyne Y3 Skate Tool.
-
-
-
Spin each wheel by hand to check for smooth rotation.
-
If a wheel is too tight, slightly loosen the axle nut.
-
If it’s too loose, tighten it just enough to prevent wobbling.
-
FixBotに聞いてみる
ある他の人がこのガイドを完成しました。
チーム
Colorado Springs, Team 1-11, Kiser Spring 2025 Colorado Springs, Team 1-11, Kiser Spring 2025人のメンバー
UCCS-KISER-S25S1G11
1 メンバー
1のガイドは作成済み
