メインコンテンツにスキップ

Unnecto Drone M Disassembly

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. Unnecto Drone M Disassembly, Unnecto Drone M Disassembly: 手順 1、 2の画像 1 Unnecto Drone M Disassembly, Unnecto Drone M Disassembly: 手順 1、 2の画像 2
    • Place the phone facedown on a cleared work area

    • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

  2. Unnecto Drone M Disassembly: 手順 2、 1の画像 1
    • Grip the top right corner of the battery.

    • Remove the battery by pulling it outwards.

  3. Unnecto Drone M Disassembly: 手順 3、 1の画像 1
    • Remove the four screws on the back of the phone using a Philips 000 screwdriver

  4. Unnecto Drone M Disassembly: 手順 4、 1の画像 1
    • Separate the frame evenly using a plastic opening tool.

    • Be careful, as the frame is thin and can break easily.

  5. Unnecto Drone M Disassembly: 手順 5、 2の画像 1 Unnecto Drone M Disassembly: 手順 5、 2の画像 2
    • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

  6. Unnecto Drone M Disassembly: 手順 6、 1の画像 1
    • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

  7. Unnecto Drone M Disassembly: 手順 7、 1の画像 1
    • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

    • The white circuit is flimsy and securely glued to the frame.

  8. Unnecto Drone M Disassembly: 手順 8、 2の画像 1 Unnecto Drone M Disassembly: 手順 8、 2の画像 2
    • Set aside the circuit board from the screen protector.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Esteban Almeida

メンバー登録日: 02/08/18

329 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S6-G4, Thomas Spring 2018 University of North Texas, Team S6-G4, Thomas Spring 2018人のメンバー

UNT-THOMAS-S18S6G4

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 39