メインコンテンツにスキップ

Unjamming an Adjustable 3-Hole Puncher

アーカイブされたガイド
このガイドは将来的な使用のためにのみ保存されてます。ご自身の修理作業には更新バージョンをご利用ください。

必要な工具と部品

  1. Unjamming an Adjustable 3-Hole Puncher, Unjamming an Adjustable 3-Hole Puncher: 手順 1、 2の画像 1 Unjamming an Adjustable 3-Hole Puncher, Unjamming an Adjustable 3-Hole Puncher: 手順 1、 2の画像 2
    • Place a penny, a X-ACTO knife and a 3-hole puncher on a flat surface.

  2. Unjamming an Adjustable 3-Hole Puncher: 手順 2、 3の画像 1 Unjamming an Adjustable 3-Hole Puncher: 手順 2、 3の画像 2 Unjamming an Adjustable 3-Hole Puncher: 手順 2、 3の画像 3
    • Grab a penny and place it between the 'jammed' puncher and place it between the bottom of the compressed spring and the washer.

    • Grip your penny firmly and compress the washer in an upward motion until you hear a 'pop' sound.

    • Your hole puncher is now unjammed.

    • Any steps after Step 2 is optional!

  3. Unjamming an Adjustable 3-Hole Puncher: 手順 3、 3の画像 1 Unjamming an Adjustable 3-Hole Puncher: 手順 3、 3の画像 2 Unjamming an Adjustable 3-Hole Puncher: 手順 3、 3の画像 3
    • Unscrew the head that keeps the puncher intact.

    • Use your index finger or a X-ACTO knife to move aside the puncher out of the 3-hole puncher.

  4. Unjamming an Adjustable 3-Hole Puncher: 手順 4、 3の画像 1 Unjamming an Adjustable 3-Hole Puncher: 手順 4、 3の画像 2 Unjamming an Adjustable 3-Hole Puncher: 手順 4、 3の画像 3
    • Be very careful when using the X-ACTO knife.

    • Use a X-acto knife to scrape off any excess paper stuck in the puncher.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Zhen Xiao

メンバー登録日: 04/09/15

156 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 30-1, Green Spring 2015 Cal Poly, Team 30-1, Green Spring 2015人のメンバー

CPSU-GREEN-S15S30G1

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 444