メインコンテンツにスキップ

はじめに

If your Udi Discovery U818A FPV drone is sluggish or fails to respond, this guide will show you how to replace the drone battery. No tools are required for this task.

  1. Locate the drone battery housed in the slot between the drone body and the camera.
    • Locate the drone battery housed in the slot between the drone body and the camera.

  2. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  3. Disconnect the battery from the drone by separating the red and black battery cable from the red and black drone cable.
    • Disconnect the battery from the drone by separating the red and black battery cable from the red and black drone cable.

  4. Remove the battery from the slot by pulling on the silver tab attached to the exposed end of the battery.
    • Remove the battery from the slot by pulling on the silver tab attached to the exposed end of the battery.

まとめ

To reassemble your device, follow these instructions in reverse order.

Debra Crawford

メンバー登録日: 2018年10月11日

401 ポイント

3のガイドは作成済み

チーム

Eastern Washington University, Team S4-G2, Crane Fall 2018 Eastern Washington University, Team S4-G2, Crane Fall 2018人のメンバー

EWU-CRANE-F18S4G2

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 69