メインコンテンツにスキップ

Turtle Beach Elite Pro Ear Cushions Replacement

必要な工具と部品

  1. Turtle Beach Elite Pro Ear Cushions Replacement, Ear Cushions: 手順 1、 1の画像 1
    • Firmly pinch ear cushion between thumb and forefinger.

    • Using the hand not holding the ear cushion, grasp the orange plate that is below the ear cushion.

    • If the black rubber lining on the orange plate is grasped, then the rubber lining on the ear piece may tear.

  2. Turtle Beach Elite Pro Ear Cushions Replacement: 手順 2、 2の画像 1 Turtle Beach Elite Pro Ear Cushions Replacement: 手順 2、 2の画像 2
    • Rotate ear cushion counter-clockwise about half an inch.

    • The ear cushion should audibly snap out of place.

    • After it has audibly snapped out of place, lift the ear cushion off of the device.

    • During reassembly, rotate the ear cushion clockwise.

  3. Turtle Beach Elite Pro Ear Cushions Replacement: 手順 3、 2の画像 1 Turtle Beach Elite Pro Ear Cushions Replacement: 手順 3、 2の画像 2
    • Using the new cushion, align the pegs located on both the orange plate and ear cushion.

    • Make sure that both the ear cushion and the orange plate have the same designation.

    • Once the pegs are aligned, push the new ear cushion in place.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Alexis Uribe

メンバー登録日: 03/24/17

510 ポイント

4のガイドは作成済み

チーム

Baylor, Team S5-G1, Williams Spring 2017 Baylor, Team S5-G1, Williams Spring 2017人のメンバー

BU-WILLIAMS-S17S5G1

3 メンバー

8のガイドは作成済み

コメント 1 件

Any recommendations as to where you can get replacements please?

John Gallacher - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 9

今までの合計 2,662