メインコンテンツにスキップ

Trio Stealth Pro 9.7" Rear/Front Camera Replacement

必要な工具と部品

  1. Trio Stealth Pro 9.7" Rear/Front Camera Replacement, Rear/Front Camera: 手順 1、 1の画像 1
    • Remove 2 black 4 cm Phillips screws on either side of the bottom of the device.

  2. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 2、 2の画像 1 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 2、 2の画像 2
    • Use the plastic opening tools and the spudger around the outside of silver metal back plate on the device to pry off the back plate.

  3. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 3、 3の画像 1 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 3、 3の画像 2 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 3、 3の画像 3
    • Use plastic opening tool to lift up black clip.

    • Gently pull out flex cable.

  4. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 4、 1の画像 1
    • Remove 3 silver 4 cm Phillips screws holding down black plastic speaker cover.

    • Gently pull up on plastic to uncover clip connected to the camera.

  5. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 5、 2の画像 1 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: 手順 5、 2の画像 2
    この手順で使用する道具:
    Tweezers
    $4.99
    購入する
    • Use the tweezers and gently lift up on the clip.

    • Remove the front/rear camera.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Edward Insogna

メンバー登録日: 03/23/15

626 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team 1-3, Miles Spring 2015 UMass Dartmouth, Team 1-3, Miles Spring 2015人のメンバー

UMASSD-MILES-S15S1G3

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 153