Tribit XSound Go TS-BTS20 Passive Radiator Replacement

はじめに

The Tribit XSound Go bluetooth speaker delivers rich, clear, room-filling sound like you've never heard before. Amazing full-range drivers, passive radiators create an auditory experience that's a delight for the senses.

必要な工具と部品

手順1 Passive Radiator

Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: 手順 1、 2の画像 1

Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: 手順 1、 2の画像 2

Insert a spudger in the seam between the front speaker grill and chassis.
Pry around the perimeter until the front grill releases.
Remove the front grill.

編集

手順2

Unscrew all the screws with the Phillips screwdriver, on the opened panel.
Lift off the speaker housing.

編集

手順3

Hold the frame which has the passive radiator in the middle.

編集

手順4

Use a spudger to push the damaged passive radiator off the frame

編集

手順5

Insert the new passive radiator into the frame.
The passive bass radiators seal out water from inside the device. Removing them multiple times may compromise the waterproof nature of the speaker.

編集