メインコンテンツにスキップ

はじめに

The keyboard needs to be removed to access everything (hard drive, optical drive, RAM, motherboard).

パーツ

パーツは指定されていません。

  1. With the battery away from you, slide the locking clips out. The left clip stays, the right clip is spring loaded.
    • With the battery away from you, slide the locking clips out.

    • The left clip stays, the right clip is spring loaded.

    • Slide the battery away from you.

  2. Use a spudger to carefully pry up the keyboard screw cover.
    • Use a spudger to carefully pry up the keyboard screw cover.

  3. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  4. Remove the two screws securing the keyboard to the chassis.
    • Remove the two screws securing the keyboard to the chassis.

  5. Carefully tilt the keyboard towards you and release the ribbon cables.
    • Carefully tilt the keyboard towards you and release the ribbon cables.

    • Use a spudger if needed to release the latch. The latch slides out.

    • The keyboard is now free and can be set aside.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Tyler

メンバー登録日: 2012年06月19日

4,348 ポイント

16のガイドは作成済み

チーム

TechForce TechForce人のメンバー

Business

2 メンバー

18のガイドは作成済み

What is the brass colored ribbon for? Mine is broken will it effect funconality , if so how do i fix it

Kathleen T - 返信

If I remember correctly, this keyboard is backlit. Most likely the copper cable is for the backlit power. A new keyboard would need to be purchased to fix it.

Tyler - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 452