Toshiba Satellite S55T-B5335 Touchpad Replacement

はじめに

The touchpad is an input device that is sensitive to touch and allows the user to scroll and select. This is a simple but tedious part to replace as it requires patience when separating the adhesive from the touchpad. Please refer to the Touchpad Troubleshooting Guide to determine if your touchpad needs to be replaced.

必要な工具と部品

手順1 Battery

Toshiba Satellite S55T-B5335 Touchpad Replacement, Battery: 手順 1、 1の画像 1

Remove the two 7 mm Phillips #1 screws that hold the battery in place.

翻訳

手順2

Toshiba Satellite S55T-B5335 Touchpad Replacement: 手順 2、 3の画像 3

Pull the battery from laptop.

翻訳

手順3 Bottom Cover

Toshiba Satellite S55T-B5335 Touchpad Replacement, Bottom Cover: 手順 3、 2の画像 1

Toshiba Satellite S55T-B5335 Touchpad Replacement, Bottom Cover: 手順 3、 2の画像 2

Remove the ten 7 mm Phillips #1 screws that secure the back cover.

翻訳

手順4

Wedge the tip of a plastic opening tool between the back cover and the metal frame.
Twist the plastic opening tool, while wedged, in order to release the retaining tabs from the frame.
Repeat these steps in a circular pattern around the laptop to release all retaining tabs.

翻訳

手順5

Once all retaining tabs are released from the frame, you can pull up on the back cover to remove it.

翻訳

手順6 Touchpad

Toshiba Satellite S55T-B5335 Touchpad Replacement, Touchpad: 手順 6、 2の画像 1

Toshiba Satellite S55T-B5335 Touchpad Replacement, Touchpad: 手順 6、 2の画像 2

この手順で使用する道具：

Tweezers

$4.99

購入する

Using a spudger, lift the black tab that holds the touchpad ribbon cable in place.
Using tweezers, pull gently on the purple tab to separate the ribbon cable from the connector.

翻訳

手順7

Gently push the back side of the touchpad in order to create a gap on the top side of the touchpad.

翻訳

手順8

Using a plastic opening tool, hold the touchpad up in the position from step 2.
While the touchpad is held up, use a spudger to scrape loose the adhesive holding the touchpad to the base.

翻訳