修理を始めるには コミュニティ ストア

Toshiba Satellite M55-S135 Hard Drive Replacement

はじめに

This guide will provide a walk-through on how to remove the hard drive from your Toshiba Satellite. Before replacing your hard drive, make sure you back up your files first if you want to have your old files on your new hard drive.

必要な工具と部品

  1. Toshiba Satellite M55-S135 Hard Drive Replacement, Hard Drive: 手順 1、 1の画像 1

    • Use the Phillips 00 screwdriver to remove the 3.62mm screw.

    編集

  2. Toshiba Satellite M55-S135 Hard Drive Replacement: 手順 2、 1の画像 1

    • Remove the plastic cover from the laptop.

    編集

  4. Toshiba Satellite M55-S135 Hard Drive Replacement: 手順 3、 1の画像 1

    • Pull the black plastic tab horizontally away from the hard drive to disconnect and remove the hard drive from the laptop.

    編集

  5. Toshiba Satellite M55-S135 Hard Drive Replacement: 手順 4、 1の画像 1

    • Use the Phillips 00 screwdriver to remove the four 6.50mm screws on the sides of hard drive.

    編集

  6. Toshiba Satellite M55-S135 Hard Drive Replacement: 手順 5、 2の画像 1 Toshiba Satellite M55-S135 Hard Drive Replacement: 手順 5、 2の画像 2

    • Use the Phillips 00 screwdriver to remove the other four 6.50mm screws on hard drive.

    • Remove the washer strips (the metal strips that the screws held down) from the hard drive.

    編集

  7. Toshiba Satellite M55-S135 Hard Drive Replacement: 手順 6、 1の画像 1

    • Pull the black tab away from the hard drive to separate the hard drive and the casing.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

9人の作成者と共同で作成されました。

Matthew Trinh

メンバー登録日: 01/31/13

63 ポイント

4のガイドは作成済み

バッジ: 6

+3 個以上のバッジ

チーム

Cal Poly, Team 7-11, Maness Winter 2013 Cal Poly, Team 7-11, Maness Winter 2013人のメンバー

CPSU-MANESS-W13S7G11

4 メンバー

5のガイドは作成済み

2 件のコメント

I have a regular SATA 2.5 hard drive and it won't fit my M55-S1001. Is there something else I need??

Matthew Halbert - 返信

According to http://www.rakuten.com/prod/120gb-hard-d..., your hard drive is the right size. If it doesn't fit, check to see if the pins connect correctly and if your laptop accepts a SATA drive and not a PATA drive; this image can help http://www.laptopking.com/sata_identify.....

---

Next, check if you're inserting it correctly. I haven't experienced replacing the hard drive with the M55-S1001, but I assume it's the same method as the M55-S135 (though it could be different).

I'm unsure if there's anything else you would need besides the correct type of screwdriver to unlock the casing but I doubt it.

Matthew Trinh - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 3,929