はじめに

This guide will show you how to replace your keyboard.

Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool.
  • Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool.

  • Push back the screen until it is horizontal with the laptop.

  • Gently remove the clips that hold the panel onto the screen hinges.

コメントを追加する

Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver.
  • Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver.

  • Gently pry the keyboard from the laptop on the upper outer edges using the flat edge tool.

  • Slowly lift the keyboard away from the laptop until you are able to remove the ribbon that connects the keyboard to the laptop.

  • CAUTION!! Make sure you remove the keyboard slowly to avoid damaging the ribbon cable.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Aryn Pauly

メンバー登録日: 2010年04月29日

1 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 10-42, Garner Spring 2010 Cal Poly, Team 10-42, Garner Spring 2010人のメンバー

CPSU-GARNER-S10S10G42

5 メンバー

10のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 5

今までの合計 8,073