はじめに

This guide describes how to remove the cooling unit of the Toshiba Satellite M45 laptop.

パーツ

パーツは必要ありません。

  1. Remove the cover from the cooling unit. Remove the cover from the cooling unit. Remove the cover from the cooling unit.
    • Remove the cover from the cooling unit.

  2. Unscrew the copper heat-sink using a #1 screwdriver, and then lift it free. Do not get any thermal grease on any components. This part can now be replaced. Unscrew the copper heat-sink using a #1 screwdriver, and then lift it free. Do not get any thermal grease on any components. This part can now be replaced.
    • Unscrew the copper heat-sink using a #1 screwdriver, and then lift it free. Do not get any thermal grease on any components. This part can now be replaced.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Follow the tear-down guide until you have access to the fan unit on the motherboard.
    • Follow the tear-down guide until you have access to the fan unit on the motherboard.

  5. Unscrew the fan unit from the motherboard using a #0 screwdriver. Once the fan is unscrewed and unplugged from the motherboard, it can be replaced. Unscrew the fan unit from the motherboard using a #0 screwdriver. Once the fan is unscrewed and unplugged from the motherboard, it can be replaced. Unscrew the fan unit from the motherboard using a #0 screwdriver. Once the fan is unscrewed and unplugged from the motherboard, it can be replaced.
    • Unscrew the fan unit from the motherboard using a #0 screwdriver. Once the fan is unscrewed and unplugged from the motherboard, it can be replaced.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Stephen

メンバー登録日: 2010年04月20日

352 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 10-42, Garner Spring 2010 Cal Poly, Team 10-42, Garner Spring 2010人のメンバー

CPSU-GARNER-S10S10G42

5 メンバー

10のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 5,323