メインコンテンツにスキップ

Toshiba Satellite L875D-S7210 Screen Replacement

必要な工具と部品

  1. Toshiba Satellite L875D-S7210 Screen Replacement, Screen: 手順 1、 1の画像 1
    • Locate the round stickers on each corner of the screen covering the screws. Use a sharp tool, such as a pointy metal spudger or tweezers, to gently remove these stickers.

  2. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 2、 1の画像 1
    • Unscrew the screws using a Phillips Head #1 screwdriver; there should be four in total, one on each corner.

  3. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 3、 1の画像 1
    • Take the opening tool and gently place it under the plastic framing the screen. Gently slip the opening tool between the plastic frame and the screen, until a change in pressure is felt, the feeling of the plastic clasps dislodging.

  4. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 4、 1の画像 1
    • Repeat this process along the interior edges of the plastic frame. Once the all plastic locks are unhooked the plastic frame should fall off the screen.

  5. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 5、 1の画像 1
    • Locate the two screws at the bottom corners of the screen.

  6. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 6、 1の画像 1
    • Using the same screwdriver (Phillips Head #1), unscrew all the screws on both sides of the screen.

  7. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 7、 1の画像 1
    • Find and unscrew the six screws (3 on each side) on the sides of the screen. Be careful while unscrewing the last few screws as the screen will still be attached to the computer in two different places and may fall out of its casing.

  8. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 8、 1の画像 1
    • At the top of the computer, there should be a cable still wired to the detached screen. Gently pull the head of the cable away from its connector until the cable dislodges.

  9. Toshiba Satellite L875D-S7210 Screen Replacement: 手順 9、 1の画像 1
    • At the back of the screen, there will be one more connector at the bottom. Remove the tape to disconnect this wire.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Ian M Sloop

メンバー登録日: 10/20/18

667 ポイント

4のガイドは作成済み

チーム

UC Davis, Team S7-G7, Lore Fall 2018 UC Davis, Team S7-G7, Lore Fall 2018人のメンバー

UCD-LORE-F18S7G7

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 7

今までの合計 308