メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Usually when people hear that their motherboard needs to be replaced they think that it is the end for their computer. It is something that should be done with care since their are many intricate parts. It's good to have something to put your screws in.

パーツ

パーツは指定されていません。

  1. After shutting down your laptop, turn your laptop over and click the left tab left, then pull the right tab right as you pull the battery out. This step should always be done before working on your laptop to minimize electrostatic shock.
    • After shutting down your laptop, turn your laptop over and click the left tab left, then pull the right tab right as you pull the battery out.

    • This step should always be done before working on your laptop to minimize electrostatic shock.

  2. Using the plastic opening tool carefully pry the plastic strip that sits at the top of the keyboard.
    • Using the plastic opening tool carefully pry the plastic strip that sits at the top of the keyboard.

  3. Use the Phillips PH00 to unscrew the four 4mm screws that holds the keyboard in place.
    • Use the Phillips PH00 to unscrew the four 4mm screws that holds the keyboard in place.

    • Using the plastic opening tool carefully pry your keyboard out without disturbing the cord underneath it.

  4. iPhone LCDスクリーン修理キット

    生涯保証付きの低コストオプション

    キット商品を見る

    iPhone LCDスクリーン修理キット

    品質ではなく、修理コストを削減しましょう。

    キット商品を見る
  5. Remaining  is the cord that connects the keyboard to the motherboard. Remove this cord after the tabs are pressed in that releases keyboard.
    • Remaining is the cord that connects the keyboard to the motherboard. Remove this cord after the tabs are pressed in that releases keyboard.

  6. Using the Phillips PH00 screwdriver remove the three 4mm screws from the cover for the RAM. Use the Phillips PH00  to remove the one 4mm screw that holds the ODD.
    • Using the Phillips PH00 screwdriver remove the three 4mm screws from the cover for the RAM.

    • Use the Phillips PH00 to remove the one 4mm screw that holds the ODD.

    • Slide the ODD outward.

    • Removing the RAM is not necessary

    • The ODD is also commonly referred to as a CD-ROM.

  7. Use the Phillips PH00 screwdriver to remove one 4mm screw.
    • Use the Phillips PH00 screwdriver to remove one 4mm screw.

    • Use the Phillips PH00 screwdriver to remove the two 3mm screws from the fan.

    • The motherboard will be accessed from below the keyboard, therefore you will not need to take out the bottom of the laptop.

  8. Use the Phillips PH00 to unscrew the fifteen 4mm screws holding down the motherboard.
    • Use the Phillips PH00 to unscrew the fifteen 4mm screws holding down the motherboard.

  9. Lift the motherboard and disconnect the 4 pin connector on the bottom side. Lift the motherboard and disconnect the 4 pin connector on the bottom side.
    • Lift the motherboard and disconnect the 4 pin connector on the bottom side.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Shaheedah

メンバー登録日: 2016年10月06日

276 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 2-5, Sullivan Fall 2016 USF Tampa, Team 2-5, Sullivan Fall 2016人のメンバー

USFT-SULLIVAN-F16S2G5

4 メンバー

5のガイドは作成済み

コメント1件

This my laptop for now .

mouhmmad ghassan - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 7

今までの合計 597